CycleMeter


4.1 ( 8291 ratings )
Diensten Sport
Developer: Yusuke sekikawa
Gratis

FEATURED at WIRED VISION
as five iphone apps that replace bike hardware

http://www.wired.com/gadgetlab/2009/07/five-iphone-apps-that-replace-bike-hardware/

Introduction.
CycleMeter’s hideous interface contrasts with its truly astonishing Rube Goldberg setup.
The app works as a cycle computer, showing a readout of your speed, distance, average speed and trip time.
It works with any iPhone and also the iPod Touch.
That’s right, the GPS-free iPod Touch. How on earth does it do that?
A cycle computer counts the revolutions of your wheels and, because you have already told it the wheel’s circumference, it can work out the rest.
Purpose built devices use a magnet on the spokes and a detector on the fork.
CycleMeter uses sound to accomplish the same thing.
Put a small plastic tag on one spoke so it hits the fork on every revolution.
Then run the cable of your earbuds down the fork and secure the microphone next to this point. The tick, tick, tick of the plastic tab is picked up and the rest is done in software.

CycleMeter uses the same mechanism with dedicated cycle computer and measure your bicycle speed as accurately as commercially-supplied one!


Functions
- LED Light
- Bell
- Slope Sensor
- GPS location logs
- Current, average & maximum speed
- Trip distance
- Elapsed time


How to Set Up
Hardware
- Attach iPhone or iPodTouch Mic to Front fork.
- Attach small flexible plastic on to wheel.
- Make sure the plastic touchs mic smoothly when wheel rotate.
(see the picture below)

APP
- Stop Detection
When on,stop time is automatically ignored in average speed and ride time.
- Distance
Select peed unit.
- Tire circumference
Enter tire circumference of your bicycle in mm .
Refer to Tire circumference reference table below.
- Slope
Please calibrate in flat condition.
Turning off this function reduce battery power usage.
- Location Logs
Logs GPS data. When disabled altitude function is also disabled.
Turning off this function reduce battery power usage.
- Disable Sleep:
Disable iPhone sleep mode.


How to Use

- Cycle Meter View
Press start button to start log.
- Map View
You can see your current location and track.
- History View
You can see your ride history.
You can delete a history by swiping gesture.
- More View
Settings and instruction is here.

NOTE
Continued use of GPS running in the background can dramatically decrease battery life.